Fountain Sculpture Overall Dimensions:
 
9' feet 6" inches tall in a cylindrical water reservoir with a 6' foot diameter. (It maximum water volume capacity is 225 gallons)

Water Reservoir Cylinder Bowl:
6' ft. in diameter, 14" tall to the rim. Along the entire circumference of the bowl a copper truss with 1/2" type L copper pipes (a Warren Truss) has been worked into the reservoir base making it a stout base, further cohesively unified when brazed into the main framework and buttresses supporting the upper structure. 

Palm Tree Trunk Dimensions:
64" inches tall, 11" inches in diameter overall, with inner 10" diameter bowls

Palm Tree Copper Rock Stand Dimension's:
5 ft. long and 16" inches wide, with a gradual height reaching 20" tall where the trunk was brazed onto

Palm Tree Leaves / 12 in total:
-- Six largest leaves measuring 28" tall and 28" inches wide, with the stems being 2" wide and 1" thick, composed of pure copper layered and brazed together for added integrity strength
-- Six smaller leaves 20" tall and 22" wide with the same stem sizes

Copper Rock "Arms" Waterfall Tide Pools:
Each congruent segment is approximately 53" inches long, 9" tall and 16" inches at the widest points, tapering down to 7" wide at the smaller ends. Both pieces have inner frameworks that the sheet copper has been melded to, while the undercarriage of those frameworks also tie into the mainframe of the center trunk as well as the truss on the reservoir bowl's inner wall. Each section of the copper rock waterfalls has 3 individual water spouts covered by copper dampers made of Sea Shells and Sand Dollars. The beauty of these two parts of the fountain is that they have the water filling into a small lagoon-like area above the main water line of the reservoir, pooling and resting in a placid state, then suddenly rushing down into the main pond where the water makes a beautiful higher pitched tinkling -- contrasted and yet complimented by the lower waterfall rush tones of the palm tree portion...

Ibis Sizes:
Each 30" inches long, 20" tall and 7" inches wide. These have also have with in their legs solid copper round rod of 3/8th" inch in diameter inside the legs, then brazed onto the copper rock platforms so they are very firmly adhered to the surface and structure itself.
Baby Sea Turtles:
Handcrafted too, yet unlike the other sculptures they are solid copper, first shaped from it's sheet metal form, then with flame thick copper was cast with flame into the pre-made sheet-copper mold, whereupon cooling they became as solid as they are cute and endearing. 4" inches long and 3" wide, and 1/2 inch thick at the widest point.
Terns: Each at 11" inches long, 6" tall and 2.5" wide

Sea Shells:  Size range at the largest clam is 6" long, 4" wide and 1.5" inches tall, going down to shells at 2.5" by 2.2.5" inches and 3/4" tall.